XTC-3D™ Brush-On Coating for 3D Print Models - 6.4oz (180g)
XTC-3D™ Brush-On Coating for 3D Print Models - 6.4oz (180g)
XTC-3D™ Brush-On Coating for 3D Print Models - 6.4oz (180g)
Protective coating for smoothing and finishing 3D printed parts that does not melt plastic. XTC‑3D™ fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. XTC‑3D™ can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media such as EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
Directions:
The two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use – 1 oz covers 100+ square inches.