eSun Standard LCD 3D Printing Resin 1kg - Clear

eSun Standard LCD 3D Printing Resin 1kg - Clear

eSun-Standard Resin is a Bio-Based Resin which is an environmental friendly resin made for LCD/LED light source printers.

Features:

• Environmental friendly.
• Low smell.
• High precision.
• High hardness and good wear resistance.
• Good moisture-resistance.

Specifications:

• Wavelength (nm) : 395-405
• Density (g/m3) : 1.08-1.13
• Viscosity (25°, MPa.s) : 150-250
• Hardness (Shore D) : 80-82
• Tensile Strength (Mpa) : 46-67
• Elongation at Break (%) : 28-35
• Flexural Strength (Mpa) : 1000-1400

Precautions

1. Storage

• 1) Keep away from light and sealed at room temperature.
• 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
• Avoid any dusty or moist environment.

2. Usage

• Shake well before use. Avoid any direct sunlight during usage.
• Keep it away from the children. Do not put in mouth. 
• Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
• If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
• Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.