Skip to product information
1 of 1

3D Print Creativity

General Purpose LCD 3D Printing Resin 500g - Yellow

General Purpose LCD 3D Printing Resin 500g - Yellow

Regular price $33.50 AUD
Regular price Sale price $33.50 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.

eSun General Purpose LCD 3D Printing Resin 500g - Yellow

Esun General Purpose LCD 3D Print Resin is specifically designed for LCD/LED light source printers to achieve better printing quality.

Product Features

  • General Purpose Resin, Compatible to most LCD printers and DLP with LED UV.
  • High Hardness 88 shore D, Low Shrinkage
  • Faster Printing Speed
  • Low Odour and No Toxic

Resin parameters

Solidify wavelength: 395nm to 405nm
Hardness (D): 88D
Viscosity (25C,mPa.s): 100 to 150 mpa
Density: 1.07 to 1.12 g / cm3
Shrinkage of Vol.: 3.72%-4.24%

Physical Properties

Flexural strength (Mpa): 59Mpa to 70Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile strength (Mpa): 35Mpa to 42 Mpa
Elongation at break (%): 11% to 20%
Hardness (D): 88D


1. Storage

  • 1) Keep away from light and sealed at room temperature.
  • 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
  • Avoid any dusty or moist environment.

2. Usage

  • Shake well before use. Avoid any direct sunlight during usage.
  • Keep it away from the children. Do not put in mouth. 
  • Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
  • If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
  • Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.
View full details